Airtecnics K7 600 A OH+FC, Инструкция по установке, эксплуатации и обслуживанию

Страница: 8 / 22

8
•
Remote control: all standards controls have an IR receiver that allows you to use a remote control.
•
End of consumable: when the level sensor of the disinfectant cartridge sends the signal through the
board, the control flashes the zero-speed led (red led). In this way the user is notified that the cartridge
must be changed. The ventilation of the purifier continues its operation as it did before the
consumable was finished. Only hydroxyl radicals stop working.
Special controls
If there is a need to control more parameters, there is an advanced control, the Clever. It has its own manual
where all its functions are explained.
Remote control features
WIRING DIAGRAMS
The following diagrams are attached:
K7 600 A
•
Purifier and disinfectant K7 600 A OH+FC with standard control. Diagram WELDOE07050
•
Purifier and disinfectant K7 600 A OH+FC CL with advanced Clever control. Diagram
WELDOE07055
K7 600 A SS
•
Purifier and disinfectant K7 600 A OH+FC with standard control. Diagram WELDOE07060
In case there is a need to connect the purifier to a PLC, the corresponding diagram will be sent.
In electrically heated air curtains, it is
used to modify the heating power. It is
not used for the air purifier.
It works with batteries
of the type AAA/LR03
Increase or decrease
the speed of the fans
Infrared system
Turning the air purifier on and off