Airstream BAMBI 2023, Руководство пользователя

Страница: 51 / 96

Exterior
2023 Bambi
6-5
Shoreline Power Supply
Your Aistream is equipped with a SmartPlug power inlet
located on the road side exterior� SmartPlug inlets offer
superior performance and ease of use� A few features
of the SmartPlug include:
• Eliminates Overheating - Increased pin & clip surface
area greatly improves electrical conductivity during
high amperage demand�
• Ease of Use - No twist required, the unique plug
body shape and push-in design means it only goes in
the right way every time - even in the dark!
• Multi-Point Locking System - Side clips lock the plug
securely into the inlet which eliminates any stress on
the pins from movement of the power cord�
• Weatherproof Seals - Multi-fin silicone gaskets
installed in the inlet cover and interior of the plug
body eliminates moisture penetration�
The SmartPlug incorporates a reverse polarity feature
which will include a series of light codes to let you
know the condition of the power coming from the
campsite power pedestal� Please refer to the provided
SmartPlug owner’s manual for more information on
reverse polarity and the light codes�
Many campgrounds provide less than 30-amp service
and your hookup may blow their fuse or circuit breaker�
If this happens, reduce the load and replace the fuse or
reset the breaker�
120-Volt Outlet and TV/Satellite Inlets
An inlet for TV/Satellite and an outlet for a 120 volt
receptacle is located on the curb side exterior and is
labeled for your convenience� Your Airstream must be
plugged into a shoreline power supply for the outlet to
operate�
Use the TV/satellite inlet to connect your Airstream to
a campground TV cable source or portable TV satellite
antenna source for viewing�
Axle and Running Gear Assembly
Each rubber torsion axle is aligned during
manufacturing, and double-checked on a random
basis� Alignment after delivery is the customer’s
responsibility�
Hitting chuck holes or rough railroad tracks while
traveling straight will only cause misalignment after
the tire has struck such objects many times� Of
course, a deep enough hole can affect the alignment
immediately�
The worse culprit is a curb because they are normally
struck at an angle� Rear axles are occasionally
damaged when people are attempting to park beside a
curb while backing up their trailer�
The trailer axle(s) is bent upward in the middle� This
bend is normal and is how the camber is obtained�
Also, toe-in is built into the axle by very slight bends in
the axle tube on each end�
Tire wear indicates misalignment� Check with your
dealer for the nearest location having the proper
equipment to correct the trailer’s alignment�
For Toe-In and Camber Specifications, see Rubber
Torsion Axle Alignment Specifications on page 8-8 �
Hitch/Coupler
The EZ-Latch coupler features a simple-to-use latching
mechanism� Hooking up is as easy as dropping the
coupler on to your hitch ball� Simply make sure that the
coupler is properly lined up with the ball, then lower
the coupler� The coupler will automatically open and
latch into place when lowered onto the hitch ball� To
disengage coupler, pull up on latch and raise coupler
off of hitch ball� Return the coupler latch to the latched
position to ensure that coupler is ready to be latched
again� The coupler features a strong composite
handle, If the handle does get damaged or becomes
missing, the coupler is still completely operational
until the handle can be replaced� Replacement parts
can be purchased through your Airstream Dealer� See
additional information included in your owner’s packet�
WARNING
Always make sure coupler is properly attached and
latched before towing.