Airstream 2001350 XL, Руководство пользователя

Страница: 27 / 121

350 XL SERIES 2001 OWNERS MANUAL
C-9
OPERATING THE STEP
1. After the installation is complete and with the entrance door open, turn the power switch on,
2. Close the door. The step should retract and lock in the "up" position.
3. Open the door. The step should extend and lock in the "down" position with the understep light on.
NOTE: The under step light is not available on all step models.
4. Turn the power switch off. The step should remain in the extended position with the understep light off
when the door is closed. Turning off the power with the step retracted will hold the step in a retracted
position as well.
5. With the power switch off. the step extended, and the entrance door closed, turn on the vehicle ignition.
The ignition override system will go into effect and the step will automatically retract.
NOTE - If the
yellow wire from the four-way connector was not connected to an ignition power source during the
installation procedure, the ignition safety system will be inoperative and the step will remain in the
extended position. In this case, the power switch must be turned on for the step to retract.
WARNING: If the vehicle is driven with the step in the extended position, there is the possibility of
causing major damage to both the step and the vehicle.
6. Turn the vehicle ignition off and open the door. The step will extend and lock in the "down" position.
This is the " Last Out” feature.
WARNING: If the door is opened and closed without allowing the step totally extend and lock in the
"down" position, the step will retract and lock in the "up" position. When the door is reopened, the
step will #tot extend. The power switch must be turned on for the step to extend.
7. The "Last Out" feature is only operative the first time the door is opened after the vehicle ignition is
turned off. NOTE: If the yellow wire from the four-way connector was not connected to the vehicle fuse
block during installation, the "Last Out" feature will not operate.
When the vehicle ignition is on, the step will always activate with the door movement, regardless of power
switch position.
NOTE: This is not valid if the aforementioned yellow wire has not been connected .
Be Safe-Look Before You Leap