![Airspan EasyST Скачать руководство пользователя страница 50](http://html.mh-extra.com/html/airspan/easyst/easyst_hardware-installation-manual_2879166050.webp)
605-0000-701 EasyST Hardware Installation User Guide Rev I
50
Electro-Magnetic Radiation
High Voltage
1.3 Important Service Information
1.
Refer all repairs to qualified service personnel. Do not remove the covers or modify any
part of this device, as this will void the warranty.
2.
Disconnect the power to this product and return it for service if the following conditions
apply:
a.
The terminal does not function after following the operating instructions outlined in this
manual.
b.
Liquid has been spilled, a foreign object is inside, or the terminal has been exposed to
rain.
c.
The product has been dropped or the housing is damaged.
3.
Locate the serial number of the terminal, antenna, and transceiver and record these on
your registration card for future reference. Use the space below to affix serial number
stickers. Also record the MAC address, located on the back of the terminal.
1.4 UL Information
- The equipment must be properly grounded according with NEC and other local safety code
requirements
- Reminder to all the BWA system installers: Attention to Section 820-40 of the NEC which
provides guidelines for proper grounding and, in particular, specifies that the cable ground
shall be connected to the grounding system of the building, as close to the point of cable
entry as is practical.
1.5 CE Notice
The MacroMAX shelf carries the CE mark to demonstrate conformity with the Radio
Equipment and Telecommunications Terminal Equipment and the Mutual recognition of their
conformity (R&TTE) directive 1999/5/EC.
WARNING: This is a class A product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.
Installation
The transceiver and antenna equipment must be installed in compliance with regional,
national, and local regulations. It is the responsibility of the system installer and/or system
operator to ensure the installed system does not exceed any operational constraints
identified by local regulations.
Refer to the sections in this product User Guide for detailed information about the correct
installation steps to ensure power and frequency settings are set correctly before connecting
the antenna.
Antenna Selection
Refer to the product User Guide for a list of Airspan Networks approved antennas. Antennas
not listed in the User Guide are outside the scope of this Declaration.
CAUTION: European Directive 1999/519/EC details basic restrictions and reference levels on
human exposure to electromagnetic fields as advised by the ICNIRP. The directive states that
adherence to these recommended restrictions and reference levels should provide a high
level of protection as regards the established health effects that may result from exposure to
such fields.
Содержание EasyST
