Airspan AS3010, Руководство по вводу в эксплуатацию

Страница: 210 / 580

E st abli shing BS R - SP R L in k w ith Au to Co nn ect C o m m i ssi o n i n g M an u al
8.1.1. Automatically Connecting SPRs to BSRs
Unconfigured and newly installed SPRs that do not appear in the ASWipLL
management database remain connected to the BSR with the strongest RF signals.
Figure 8-1 displays the AutoConnect process without redirecting the SPR to a
different BSR.
Figure 8-1: AutoConnect without Redirecting to a different BSR]
The following lists the chronological process of the AutoConnect feature with no
redirecting to a different BSR:
1.
2.
3.
Once an unconfigured SPR is installed at the subscriber’s site, and then turned
on, it automatically establishes a link to a BSR with which it has the strongest
RF reception.
The BSR provides the SPR with a temporary IP address (for communication and
configuration).
The SPR sends an SNMP trap to the ASWipLL management station (i.e.
WipManage) notifying WipManage that the SPR has performed AutoConnect.
8-4 Airspan Networks Inc. 01040311-07