Airspan AS3010, Руководство по вводу в эксплуатацию

Страница: 197 / 580

C o m m i ssion ing M anu al C h an g i n g L i n k f r o m B r i d g e t o R o u t er
7.5. Task 3: Add an SPR
When you change the SPR and BSR from the transparent bridge mode to IP router
mode using WipConfig, WipManage deletes the SPR associated with the BSR.
Therefore, you need to add the SPR again in WipManage. In addition, you need to
add a static route from the BSR to the SPR and define a default gateway (if relevant)
for the SPR.
Before you add the SPR in the BSR Zoom window, you can verify, in this window,
that BSR is configured for IP routing. The figure below displays the BSR Zoom
window, which displays the BSR’s mode as "Router". In addition, the SPR icon
contains a check mark (
√ ) indicating that the SPR has been deleted.
SPR deleted
from BSR
BSR in router
mode
Figure 7-14: Verifying that BSR is in IP router mode
01040311-07 Airspan Networks Inc. 7-15