Airspan AIRVELOCITY 2700, Руководство по установке

Страница: 22 / 27

AirVelocity 2700 5G Sub-6Hz
4T4R Indoor Radio Unit – Installation Guide
© Copyright Airspan Networks Ltd., 2021 P/N: DUG01251 Rev. A3, Apr 2021
18
7. Push down slightly to engage the heads of the screws onto the slots.
8. Insert the M3X6 screw to lock the unit onto the Mounting bracket. as shown below:
Figure 17: Fasten Unit on Mounting Bracket
9. Optionally after installation is completed install the Kensington Security lock, this is used
both for anti-theft and anti-drop purposes. Fasten the other end of the Security cable to a
secure connection on the wall.
10. Connect the necessary cables to the relevant ports, see Cable Connections .

Fiber Ethernet port – SFP+ 10GbE – if applicable

Copper Ethernet port – ETH 10GbE – if applicable

Connect to power using a Phoenix Type Connector 2-Pole 5mm Pitch – (input range 42-
57vDC)
4.3 Cable Connections
4.3.1 DC Cable Connection
1. Insert the power cable wires into the Phoenix Type Connector (2-Pole 5mm Pitch).
Table 5 Wiring Table
Wire Color Polarity Symbol
Black Negative
-
Red Positive +
2. Secure the wires by tightening the retention screws, as shown in figure below.
4.3.2 Fiber Ethernet (SFP+) Cable Connection
Insert SFP+ module and connector (when applicable), as shown in figure below.