AirSpace G6, Руководство пользователя, Страница: 18 / 23

Maintenance
Changing Belts
1. Turn off the machine and unplug the
power cord from the machine.
2. Remove the two screws (A) holding on
the upper heater block cover
3. Remove the two screws (B) holding on
the lower heater block cover.
4. Remove the two covers from the machine.
5. Raise the upper heater block by moving the
clamp lever (C) into the up position.
6. Pull the rear belt guide roller (D) forward
and pull off the old belts.
7. Put the new belts on by putting the belt on
the front roller (E) first and then onto the
back roller (D) with the roller pulled
forward.
8. Attach the upper lower side covers.
18
A
B
C
D
E