This procedure will ensure that the
chamber back pressure does not damage
the concentrator
.
Страница 1: ...tified by a green circle around it Step 4 Remove the end from the shorter end of the connecting hose insert through the opening where the nut was removed and thread the nut on the tubing Tighten snugly with a wrench Step 5 Reach inside the chamber and pull the connecting hose through to seat the black tape in the back side of the valve nut Step 6 Replace the end on to the tubing with the larger en...
Страница 2: ...or and turn the unit ON If the concentrator ramps up normally then the issue is one of the tubing lines either inside the chamber with the mask tubing or on the outside of the chamber with the concentrator tubing Ensure that all tubing is straight for the oxygen to flow properly Next check the filter at the top of the Concentrator to ensure that it is clean and free flowing If it is not clean this...
Страница 3: ...8 on the scale Never place the setting at 10 or beyond 2 Always turn ON your oxygen concentrator BEFORE turning ON your hyperbaric Chamber Turn OFF the hyperbaric chamber before turning OFF the oxygen concentrator In short Turn ON your concentrator first and turn it OFF last IMPORTANT NOTES 1 ...
Страница 4: ...This procedure will ensure that the chamber back pressure does not damage the concentrator ...
