Airrex HSCO-14, Руководство по эксплуатации и каталог запасных частей

Страница: 4 / 60

rev0-2011
Operating Instruction & Parts Manual
The following instructions are for ensuring the user ’ s safety and to prevent any physical injury or material
damage. Please read carefully and follow all instructions. There are two sections to these instructions:
WARNING and CAUTION.
* Use a 115V~, 60Hz (HSCO-14/18), 220V~, 60Hz(HSCO-24A) 1 Phase power supply only.
(Wrong supply may cause a fire and / or shock hazard)
* Ensure the safety of the location in which cooler is to be used. * Ensure the floor or ground is smooth and sound.
* Ensure you allow at least 20inch air space all around the cooler. * When in position LOCK the casters to prevent rolling.
* Never use the cooler at more than 2
。
incline.
FOR MAXIMUM EFFICIENCY
*
In airtight areas use vertical exhaust into ceiling.
* If possible locate exhaust outlet through a window
or door to outside.
* Ensure correct electricity supply.
GENERAL SAFETY INFORMATION
Operating Instruction & Parts Manual
* Securely plug into a grounded outlet. (Unless earthed, may cause electric shock)
* Do not use a damaged power cable, plug or socket. (Short, fire or shock hazard)
* Do not remove plug by pulling cable or with wet hands. (Risk of fire and electric shock)
* Before cleaning, remove plug from socket. (Otherwise risk of electric shock)
* Do not place anything on top of the machine.
(This could cause electric shock, malfunction or injury)
* Do not use an extension cord. (Risk of fire and / or electric shock)
* Do not
‘
kink
’
or sharply bend the power cable nor put any weight on it.
(The insulation may be damaged causing fire and/ or electric shock)
* Do not turn off by removing power plug. Always turn off at control panel first.
(Risk of electric shock and / or malfunction)
* Do not use this cooler on unstable or inclined surfaces. Always use on solid
flat floor. (Risk of falling causing injury, fire or malfunction)
* A damaged power supply cable must be replaced with a new power supply
cord obtained from the product manufacturer and not repaired.
* Do not place cooler on uneven, unstable or inclined surface.
(This could cause malfunction)
* When storing the cooler, ensure that it is kept in a dry, cool place.
(To prevent corrosion and malfunction)
* If not being used for some time or if lightening is present, always unplug
from power. (To prevent risk of electric shock, short circuit or fire)
* Do not spray water on to the cooler nor use solvents such as benzene,
thinner or alcohol for cleaning. (There is a risk of electric shock and / or short circuit)
* Designed for indoor usage.