2
Airquee Ltd, Duel House, Llandowlais Street, Cwmbran, NP44 7XB, UK
- The surface of the slide to be watered at all times. When allowed to become dry, the risk of
friction burns rises significantly. The stream of water to be slow enough in order to avoid filling
up the pool too quickly.
- The slide has anchor pegs running on both sides. Users could harm themselves by stepping on
these pegs if allowed to leave the slide surface at undesignated areas. The anchor pegs at the
immediate vicinity of the pool should be completely hammered into the ground to minimise the
chance that users come in contact with them.
- A 1.8 meter clear space to be maintained all around the unit at all times without any obstructions
that could injure users while stepping/jumping down the side of the slide.
- We advise to cover the anchor points at all times.
- Do not allow users to use a float or any inflated mattress to slide on. The walls of the slide are
not high enough to be able to contain users on an elevated sliding device, and since the slide is
wet, users could slide over the wall.
- Position the fan as far away from the slide as possible, perfectly perpendicular to it in order to
achieve the distance of at least 2.5m (the distance of the filler pipe).
- Vigilant and constant supervision is required because of the dangerous combination of water
and electricity.
THE YELLOW FIELDS REPRESENTS THE SURFACE WHERE THE SLIDE IS POSITIONED. AN
ANGELED PLAIN WILL CURVE THE SLIDING PATH INTO THE WALLS, WHILE AN EVEN
PLAIN WILL ALLOW USERS TO SLIDE ON THE MIDDLE.
Min. 1.8m clear zone all around the slide
>1.8m