1
Inclusions
*The listed inclusions are in addition to the ones shown in the main manual. The number and type of
inclusions depends on the model you ordered.
This inflatable can be set up and packed away by 3 persons who have
had proper manual handling training and use the correct equipment to
move the inflatable.
Hazards relating to electrical equipment:
1.
The most important rule when handling the mechanisms is to
ALWAYS DISCONNECT IT
from its power source when
ASSEMBLING THE UNIT
, opening the Control Box or the Drive
Motor.
2.
The control box and the wiring used within the game are
NOT WATER PROOF OR WATER
RESISTANT
, therefore we do not recommend operating the unit in the rain.
Using electrical
equipment in wet or damp conditions can be dangerous. If you suspect water has entered
any of the electrical components they should not be used until completely dry and tested. We
recommend taking professional advice where necessary.
3.
All cables and electrical equipment must be tested in accordance with the regulations of your
country.
4.
In accordance with HSE guidelines, all 240v equipment should be protected with an RCD
(Residual Current Device) having a maximum trip current of 30 mA.
RCD’s are available from
Airquee or your electrical store.
Set Up:
- The surface where you will install the game must be totally flat and level! An inclined surface
would result in the discs touching the platforms, thus creating heavy friction.
- Roll the 1
st
mechanism with the help of its wheels to its final place and connect it with the
Control Panel. Take out the wheels and replace them with the supplied legs. In order to do
this, someone has to tilt the mechanism. (see the 2
nd
picture below) Add the disc to the shaft
of the Drive Motor.
Drive Motor
Wheels
Legs
Leg Covers
Mechanism
Covers
Discs
Platform
Covers
x2
x8
x8
x8
x2
x2
x3
3
x