Page 3 of 6
Set up: please read the instructions found in the Pool Manual supplied.
It is essential that the pool inflatable is transported form the storage area, to the
inflation area, near the pool carefully and not dragged, as this will cause damage
including tears and grazes to the fabric. A trolley should be used if necessary.
The surface of the area, where the inflatable is to be inflated, should be non-abrasive
and clear of any protrusions or objects that might damage the inflatable.
Please read the Constant Flow Inflatables-p.7 in Pool Inflatable Operational
Manual.
The slide is inflated and floated into position, then it is anchored to the
railings as indicated in the image below
:
There are 6 anchors at the bottom of the slide
– 3 on each sides. Extra
anchors have been provided.
Important:
We recommend at least 2 supervisors to be present at all time
– one
supervisor on the platform and one on the side of the pool.
Please
make sure the area under the slide and the anchors of the unit are in
sight at all time.
Please adhere to the stated number of users and do not allow the slide
to become overcrowded. No rough play on the unit.
