V
、
Pay attention:
1
、
This RC can control 5 to 10 meters, it shows
“
Er
”
when out of the distance, please use it in its range.
2
、
The remote control coding: This remote control and pump are coded before leaving the factory, when it
appears
“
Er
”
in the effective distance that requires user to calibrate the code again. Method as follows:
Connect the power and during the 30s when light shows red, please press the RC lighted, then press Lumbar
key for 3S, and LCD will show SU, it means coded successfully; Another remote control coding method: wait
for the prior coded remote control auto off, cut off the pump power and restart connecting the power, the
indicator light shows 30 seconds is code window, light the remote control which needs to code, and press
Lumbar key for 3S, LCD shows SU, which indicate the coding successfully; if not succeed, please repeat the
above steps.
3
、
Three AAA-LR03-1.5V batteries are fitted for this RC; LCD will show the signal of its low power and please
change the batteries in time to avoid damage. Without any using in the long time please remove out the
batteries.
