USER MANUAL
PREFACE
Trademarks
airPointe of New Hampshire and the airPointe of New Hampshire logo are trademarks of
airPointe of new Hampshire. All other product names are copyright and registered
trademarks or trade names of their respective owners.
Information in this document is provided solely to enable system and software
implementers to use the airPointe of New Hampshire system. There are no express or
implied copyright licenses granted hereunder to design or fabricate any integrated
circuits or integrated circuits based on the information in this document.
airPointe of New Hampshire reserves the right to make changes without further notice
to any products herein. airPointe of new Hampshire makes no warranty, representation
or guarantee regarding the suitability of its products for any particular purpose, nor
does airPointe of New Hampshire assume any liability arising out of the application or
use of any product, and specifically disclaims any and all liability, including without
limitation consequential or incidental damages.
The user of this system is cautioned that any changes or modifications to this system,
not expressly approved by airPointe of New Hampshire. could void the warranty.
FCC COMPLIANCE
Changes or modifications not expressly approved by airPointe of New Hampshire could
void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in
a commercial environment. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
