AirPatrol Lite WiFi 2, Полное руководство, Страница: 4 / 32

Lights and buttons
4
The controller has 4 LED indicators and 2 buttons for easy setup. It has also hidden infrared (IR)LEDs that
transmit your commands to the AC and IR receiver for auto-detection and custom presets.
LED 1 - Power
on – switched on
blinking – software updating
off – switched off
LED 2 – IR (InfraRed) LED
on – transmitting IR signal
LED 3 – WiFi connection LED
on – connected with access point and internet
blinking – starting connection or no connection to internet
off – no connection
LED 4 - Pairing
on – pairing mode active
off – pairing mode inactive
PAIRING button
Use the PAIRING button to pair your phone or tablet
with AirPatrol controller by following the steps
described in mobile application.
TEST button
Short push turns the AC or heat pump ON/OFF. Use
the TEST button to confirm that the IR beam from
the controller reaches the heat pump.
NB! Hold both buttons for 5 seconds to make full
reset.