Configuration
3-6
Partner Address
If the Wireless Client is configured to operate in Ad Hoc
Mode, it is necessary to enter a Partner Address. To
enter a Partner Address:
1.
Select Configuration from the Main Menu.
2.
Select Partner from the Configuration Menu.
3.
Type the appropriate Partner Address at the prompt
and press Enter.
Serial Data Port
To configure the Serial Data Port:
1.
Select Configuration from the Main Menu.
2.
Select Port from the Configuration Menu.
3.
Select the appropriate parameters on the Configu-
ration Serial Port Menu and press Enter after each
selection.
NOTE: The Partner Address is required for one of the two
Serial Client units. The other unit must be set to None.
Содержание MC3500
Страница 34: ...Configuration 3 8...
Страница 36: ...Appendix A A 2...
Страница 40: ...Appendix B B 4...
Страница 46: ...Appendix C C 6...
