AB1600_V0.3
Connection Process
Power-on the DUT, and press the connection button of the device to enter discoverable mode.
Select corresponding COM port number of DUT in the COM Select region of the Lab Test Tool, and
will be shown in the output window, as in figure 3-2 and figure 3-3.
Figure 3-2
Figure 3-3
If the success message is not shown, please check if the DUT is correctly powered up, the link between
DUT and PC is correctly connected, and the DUT is in discover
again.
4
Test Functions
4.1
TX Test
There are three modes supported in the TX Test functions, i.e. Single-tone TX, Continuous TX and Burst
TX.
Содержание AB1602
