Airofog 600-000-110, Руководство пользователя

Страница: 3 / 5

Airofog USA
15074 Aviation Loop Drive
Brooksville, FL 34604
USA
+1-352-593-5152
airofog@airofogusa.com
www.airofogusa.com
Operation
Instructions
Unscrew the cap (18) and insert the stainless steel or plastic needle
(19)
Remove the tip cover of gel cartridge then insert cartridge into the gun
compartment by pushing it against the piston (12) until the base of the
cartridge is seated properly on top of the hook of the trigger
Adjust the regulator (4) to position 5. Push the gel bait plunger gently
from the base of the cartridge to drive the gel to the outlet, then pull the
trigger repeatedly until the gel comes out.
Now the gun is ready for application
Dial the regulator 1-5 for desired dose
Take off needle (19) from the gun and reinstall the cap (18) to prevent
the gel from drying at the output
Dial the regulator to “0” position to avoid the trigger being pressed on
accident
Leave gel cartridge in the gun so the gel does not dry and clog gun
parts
Clean used needles with the provided cleaning rods
Put all gun parts back into the gun’s carry pouch
Dosage performance varies depending on viscosity and density
of the gel used. Airofog Gel Gun provides two types of wheel
regulators: Smaller dose(red) and a bigger dose(black) which is
marked “B” on the wheel
Airofog gel gun is only for gel bait, not for application of high
viscosity pastes
Operation
After Use
Attention
Dosage Reference
18
19
12
3
4
1.
2.
3.
4.
5.
1.
2.
3.
4.
5.
Dial # Black(Large)
1
2
3
4
5
.05g
.1g
.15g
.17g
.19g