Airo X RT Series, Руководство по эксплуатации и обслуживанию

Страница: 61 / 118

Use and Maintenance Manual - X_RT Series Page 61
7.3.4 Hydraulic circuit oil level check and change
Check the level periodically by means of the provided indicator
(detail
A in the picture aside) and make sure that the level always lies
between the max. and min. values.
If necessary top up until max.
level is reached. The oil check should be carried out when
platform is completely lowered and levelling outriggers fully
raised (if any).
Completely change the hydraulic oil at least every two years.
To empty the tank:
Lower the platform completely.
Retract the outriggers completely (if present).
Stop the machine by pressing the emergency stop
button of the ground control panel.
Place a container under cap ( B ), under the tank, and
unscrew it.
Use only the types of oil and quantity indicated in the table below.
HYDRAULIC SYSTEM OIL
BRAND
TYPE
-20°C +79°C
TYPE
-30°C +48°C
REQUIRED QUANTITY
SYNTHETIC OILS
See chapter "Technical features".
ESSO Invarol EP46 Invarol EP22
AGIP Arnica 46 Arnica 22
ELF Hydrelf DS46 Hydrelf DS22
SHELL Tellus SX46 Tellus SX22
BP Energol SHF46 Energol SHF22
TEXACO Rando NDZ46 Rando NDZ22
Q8 LI HVI 46 LI HVI 22
PETRONAS HIDROBAK 46 HV HIDROBAK 22 HV
BIODEGRADABLE OILS - OPTIONAL
PANOLIN HLP SINTH E46 HLP SINTH E22
Do not dispose of used oil in the environment. Comply with the current local standards.
The lubricants, hydraulic oils, electrolytes and all detergent products should be handled with care and disposed of in safety
according to the current regulations. A prolonged contact with the skin may cause irritations and dermatosis; wash with water and
Fig. 23
A
B