Airo A16 J Series, Руководство пользователя

Страница: 61 / 128

User’s Manual – A16 J A18 J Series Page 61
7. MAINTENANCE
 Always carry out maintenance operations with machine at standstill, after having removed the
key from the control panel, and with the platform in rest position.
 The maintenance operations described here below refer to a machine in ordinary working
conditions. In case of harsh operating conditions (extreme temperatures, corrosive
environments, etc.) or following a long non-use period, contact AIRO customer service to
adjust the maintenance schedule.

Repairs and maintenance operations are to be carried out by trained and authorised
personnel only. All maintenance operations should be carried out in compliance with the
actual work safety regulations (safety at work places, personal protection equipment, etc...).

Carry out only the maintenance and adjustment operations described in this user manual. In
emergency situations (e.g. breakdown, wheels replacement) contact our Technical Service

During maintenance interventions, the machine must be completely locked. Before any
maintenance operation inside the lifting structure, make sure that it is secured against
accidental lowering of the booms.

Remove the battery cables and provide batteries with a suitable protection during welding
operations.
 Carry out maintenance operations on the heat engine only when it is not running and
sufficiently cool (except for those operations, such as oil change, which must be performed
when the engine is hot). Risk of burns in contact with hot parts.
 Do not use petrol or other flammable materials to clean the heat engine.
 For maintenance operations on the heat engine, read the manufacturer's manual of the engine
supplied on machine purchase.

In case of replacement, use original spare parts only. For parts that are not original please ask
the manufacturer for prior approval.

Disconnect the 230V AC and/or 380V AC sockets, if any.

The lubricants, hydraulic oils, electrolytes and all detergent products should be handled with
care and disposed of in safety according to the current regulations. Prolonged contact with
the skin may cause forms of irritation and skin diseases; wash with water and soap and rinse
well. Also contact with the eyes, especially with the electrolytes, is dangerous; wash with
water and see a doctor.
CAUTION!
NEVER MODIFY OR TAMPER WITH MACHINE PARTS TO IMPROVE THE MACHINE
PERFORMANCE AS THIS MAY AFFECT ITS SAFE OPERATION.
7.1. Cleaning
To clean the machine, use non-pressurized water jets after properly protecting the following parts:

The control panel (both platform and ground);

The electric ground control unit and all electric boxes in general;
 The electric motors.
Do not use pressurized water jets (high-pressure cleaners) to clean the machine.
After washing the machine, always:
 Dry the machine.
 Check integrity of plates and stickers.
 Lubricate the articulated joints equipped with greaser.