airnet AIR-BR1000AGN, Быстрое руководство по установке, Страница: 11 / 19

11
www.netkrom.com
PC
Configuration
3
Quick
Installation
Guide
If you don’t use the uConfig Utility you need to establish Ethernet
connection between your PC and the Outdoor AP, by default the
Outdoor AP has the IP address 192.168.168.1. Therefore, your PC
must be in the same network segment as the Outdoor AP is to get
Ethernet connectivity. The steps shown below are for Windows XP.
Step 1:
Go to Start button, then go to My Network Places and
finally click on Network Connections.
Right Click over your network adapter and select Properties.
Step 2:
Select the Internet Protocol Option and then click in Properties.
Step 3:
Now configure the IP Address of your network adapter with an
IP in the same Network segment as your Outdoor AP is as it is
shown in the picture, you don’t need to assign any gateway
address.
Press OK and then press the Close button.
High Capacity Wireless Networks
300 Mbps GIGA1000 SERIES