A. System Components in the Box:
1.
Fountain Pump with Quick Disconnect, float mount ring and
Classic Spray Pattern (installed)
2.
Float - Blue
3.
Power Cord
4.
Control Panel
5.
Crown & Trumpet Spray Pattern (interchangeable)
6.
Trumpet Spray Pattern (interchangeable)
B. Prepping the EcoSeries™ for Installation:
1)
Ensure you have power close to your pond. If you don’t, we recommend to ALWAYS use a
licensed electrician to properly run power down to the pond.
2)
Mount the Control Panel in a fixed position next to the power source.
3)
Choose Your Spray Pattern (Fig. 3)
a)
The EcoSeries™ comes packaged with the Classic spray pattern installed. However, the
EcoSeries™ includes two additional spray patterns (Trumpet and Crown & Trumpet).
Pick the one that best suits you or your special event.
b)
To change a pattern, simply unscrew the nozzle nut, replace the pattern and reinstall the
nozzle nut.
4)
Assembling the Unit (Fig. 4)
a)
Lay the float flat on the ground with Airmax
®
logo facing up.
b)
Place the fountain pump assembly into the center of the float.
c)
Lift the float straight up and ensure that the fountain pump lead power cord passes
through the center hole. Gently lay the fountain to one side.
d)
Securely attach the power cord to the fountain pump lead quick disconnect.
e)
Attach the power cord strain relief to the loop underneath the float mount ring. (Fig. 2)
f)
Attach a mooring cable (not included) for each of the two loops underneath the float
mount ring. (Fig. 2)
3. Setup & Installation
• 2 stakes
• 2 carabiners
• 4 cable clamps
• 150’ or 250’ black vinyl
coated galvanized cable
(Mooring Line)
Recommended Mooring Kit
Power Cord
Loop
Loop
Underwater Disconnect
Carabiner
EcoSeries™ Floating Fountain
Control
Panel
Mooring Stake
Classic
Trumpet
Crown & Trumpet
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Unscrew Nozzle Nut to
change Patterns
Mooring Kit Options:
#651052 –
150’ Mooring Kit
#651054 –
250’ Mooring Kit
* Mooring Kit Not Included with Fountain
Mooring Line
(Vinyl Coated Galvanized Wire)
ENGLISH
4
