SI-001-r2
SI-0001 PC Motor Replacement AP332F (Maxon)
Page 3
3.
Procedure
3.1
Preparation
a.
Select a suitable space to perform this maintenance. Space should be clean, dry and
well lit.
b.
Suitable containers should be available for separation and identification of parts and
fasteners.
Caution:
While it is possible to perform this operation while the propeller is mounted on
the aircraft, this is not recommended. If it must be done on the aircraft, normal
precautions should be taken to ensure the safety of the operator, engineer and
propeller system (i.e. disconnect electrical supply).
3.2
Disassembly
a.
Undo screws and remove motor cap.
b.
Note electrical connections including:
i.
Orientation of each of the electrical circuits (black, red, green).
ii.
Position and orientation of each of the electrical terminals.
iii.
Exit holes of each of the PC motor electrical wires.
