Airmar WeatherStation 110WX, Руководство пользователя и инструкции по установке

Страница: 19 / 28

19
Connecting to an NMEA 2000
®
Network
CAUTION : Models with a heater cannot be used with an NMEA 2000 network.
CAUTION : Only two termination resistors are required on an NMEA 2000
network. More than two will degrade the bus performance.
Route the WeatherStation cable to the NMEA 2000 network. Plug the NMEA 2000
connector into the network node (Figure 10). Coil any excess cable and secure
with cable ties to prevent damage.
NOTE : WeatherStation cables greater than 6m (20') have a termination resistor
built into the WeatherStation connector (Figure 11).
Figure 10. NMEA 2000 WeatherStation Cable [6m (20') shown]
10
WeatherStation
NMEA 2000
network
connector
connector
locator
10
Copyright © 2008 - 2011 Airmar Technology Corp.
Figure 11. NMEA 2000 WeatherStation Cable [10m (33') shown]
10
WeatherStation
connector
NMEA 2000
network
connector
locator
120 Ω
termination resistor in connector
10
Copyright © 2009 - 2011 Airmar Technology Corp.