AirMan SDG45S-3A8, Инструкция по эксплуатации

Страница: 36 / 63

4. Operation
4
-
16
4.7 Operation and Stopping
Keep the output terminal cover shut and locked
whenever the machine is running.
Notice that the voltage of several hundreds volt is applied to
the output terminal and control board.
When opening the door unavoidably, be careful not to touch
the rotating parts and hot parts. It could cause scalding and
serious injury.
When removing or connecting a connecting cable for
changing load, be sure to switch OFF the circuit breaker,
remove the starter key from the starter switch, then carry out
a work. The operator must keep the key during operation.
Neglecting the cautions mentioned above, and a third
party starting the machine during operation may cause
serious accidents such as electric shock.
When the breaker functions so often during operation, reduce the load.
When using single- phase load, check the current of each phase and try to keep the load of each
phase constantly average.
If you continue to operate the generator main unit, ignoring and nelecting these cautions, it could
cause burning to the unit and resulting in fire. Furthermore, should continue operation at the lower
level than the standard rated frequency, it could cause burns to the generator main unit and also the
motor of the load.
Do not, under any circumstance, open the portions below
during operation.
Coolant drain valve and plug
Engine oil drain valve and plug
Never touch the interior of output terminals ,control board
Pay caution to overload and unbalanced load
Draining during operation prohibited
W013
H990432
PK0028