AirMaid 10000V Скачать руководство пользователя страница 4

4

CONTENTS

LIMITED WARRANTY FOR INTERZON EQUIPMENT 

This warranty is subject to the following conditions.

A new product is warranted to be free from defects and/or workmanship for a period of 3 years. If the product 

registration form is submitted to Interzon within ten (10) days after the installation is completed, the warranty 

shall begin on that date.

The product warranty covers the repair or replacement of defective parts, labor charges according the recommended 

hours by Interzon, and a maximum travel charge of 175 miles round trip.

The product must be installed according to the specifications described in the product Installation and Service Guide. 

Circumstances which can void the warranty include, but are not limited to:

1. If the installation of the generator does not follow all requirements stated in the product Installation and  

Service Guide;

2. If the airflow or pressure are not kept to the product specifications;

3. If any foreign matter such as water or other cleaning agents are sprayed into the generator;

4. If the regular inspection and cleaning maintenance for the product are not followed;

5. Any other damage resulting from accident, alteration, misuse, if the serial number is removed or defaced, or any 

other external influences.

A spare part is warranted to be free from defects and/or workmanship for a period of ninety (90) days from the date 

of its installation. The warranty covers only the repair or replacement of the part itself and does not include any 

labor, travel or other incidental charges related to its replacement.

Check that the shipment includes the components below and that there is no visible damage. Remove the service hatch 

and carefully inspect the CGC ozone cells that none of the glass tubes are damaged. Any damage must be reported 

immediately to the distributor or manufacturer. Read this guide completely before beginning the installation.

 1.  CHECK  PRODUCT

1 x AirMaid® Ozone Generator

  1.  Check Product........................................................ 4
  2.  Planning Your Installation .................................. 5
  3.  Sample Installations ............................................. 7
  4.  Installation Detail .................................................. 8
  5.  Electrical Installation ......................................... 10
 6.  Commissioning .................................................... 11

  7.  The AirMaid Alarm Panel .................................. 13
  8.  Service and maintenance................................. 16
 9.  Specifications ....................................................... 17
 10.  Troubleshooting .................................................. 18
 11.  Product  Registration .......................................... 19

1 x AirMaid® Alarm Panel

+

Содержание 10000V





















Отзывы: