AirLive Z-Wave Plus SI-104, Руководство пользователя

Страница: 13 / 15

1. Overview
AirLive SI-104 User Manual 8
3. Place the bracket so that the two longest hold slots are aligned on the line. In each of
keyhole slots, drawing a mark to locate a mounting plug and screw.
4. Remove the bracket.
5. Drill two holes at the marks and insert plastic wall plugs. Put the Smoke Sensor away
from plastic dust.
6. Attach the bracket to the wall. Line up the slots of the bracket and the Smoke Sensor.
Push the sensor onto the mounting bracket on turn it clockwise to fix it into the place.
Pull onward on the Smoke Sensor to make sure it is securely attached to the mounting
bracket.
1.12 Z-Wave Configuration Settings
Notice:
All of the configuration, the data size is 1.
The configuration mark with star(*), means after the remove the setting still keep, don't
reset to
factory default. Unless the user execute the “RESET” procedure.
The reserve bit or not supported bit is allowed any value, but no effect.
NO. Name
Def. Valid Description
7(*) Customer
Function 4 All Customer function switch, using bit control.
0
Bit0: Reserve.
0
Bit1: Reserve.
Bit2: Reserve.
Bit3 : Reserve.
Bit4 : Notification Type,
0: Using Notification Report.