manualshive.com logo in svg

AirLive WMU-6500FS-MPCI, Руководство пользователя, Страница: 16 / 59

Поделиться
Скачать
AirLive WMU-6500FS-MPCI Скачать руководство пользователя страница 16

 

 

- 15 - 

iii.

 

TTLS: Tunneled Transport Layer Security. This security method provides for 

certificate-based, mutual authentication of the client and network through an 

encrypted channel. Unlike EAP-TLS, EAP-TTLS requires only server-side 

certificates. 

iv.

 

LEAP: Light Extensible Authentication Protocol. It is an EAP authentication type 

used primarily in Cisco Aironet WLANs. It encrypts data transmissions using 

dynamically generated WEP keys, and supports mutual authentication. 

v.

 

MD5-Challenge: Message Digest Challenge. Challenge is an EAP authentication 

type that provides base-level EAP support. It provides for only one-way 

authentication - there is no mutual authentication of wireless client and the network. 

 

2.

 

Session Resumption: user can choose “ Disable ”, “ Reauthentication ”, “ Roaming ”, 

“ SameSsid ” and “ Always ”. 

3.

 

Identity and Password: Identity and password for server. 

4.

 

Use Client Certificate:    Client Certificate for server authentication. 

5.

 

Tunnel Authentication 

i.

 

Protocol: Tunnel protocol, List information include “ EAP-MSCHAP ”, 

“ EAP-MSCHAP v2 ”, “ CAHAP ” and “ MD5 ” 

ii.

 

Tunnel Identity: Identity for tunnel. 

iii.

 

Tunnel Password: Password for tunnel. 

6.

 

CA Server: Certificate Authority Server. Each certificate is signed or issued by it. The detail 

operation will explain in section 4-2-2 CA Server 

 

3-2-2

 CA Server 

Depending on the EAP in use, only the server or both the server and client may be authenticated and 

require a certificate. Server certificates identify a server, usually an authentication or RADIUS 

server to clients. Most EAPs require a certificate issued by a root authority or a trusted commercial 

CA. Show as the figure. 

1.

 

Certificate issuer: Choose use server that issuer of certificates.   

2.

 

Allow intimidate certificates: It must be in the server certificate chain between the server 

certificate and the server specified in the certificate issuer must be field. 

3.

 

Server name: Enter an authentication sever root. 

Содержание WMU-6500FS-MPCI




























































Отзывы:

Нет отзывов