AirLive WH-5420CPE Скачать руководство пользователя | Manualshive

Страница: 17 / 97

background image

14

to reach the CPE. This is because they may no longer belong to the same IP network

address space.

Step 3.

Change the sett

ing of the PC back to ―obtain IP addresses dynamically‖. Now you

can put the WH-5420CPE and the PC to your network where the DHCP server is
connected. From then on, any wireless client configured to ―obtain IP addresses
dynamically‖ will work with the CPE, with each other, and with devices on the wired LAN
network.

1.3.6 Set up a wireless client as a DHCP client

The following will give detailed steps of how to configure a PC or a wireless client to ―obtain
IP addresses automatically‖.
In the case of using a LAN attached PC, the PC must have an Ethernet interface installed

properly, be connected to the WH-5420CPE either directly or through an external LAN

switch, and have TCP/IP installed and configured to obtain an IP address automatically

from a DHCP server in the network.

In the case of using a wireless client, the client must also have an 802.11a wireless

interface installed properly, be physically within the radio range of the WH-5420CPE, and

have TCP/IP installed and configured to obtain an IP address automatically from a DHCP

server in the network.

Then perform the following steps for either of the cases above. To configure types of
workstations other than Windows 95/98/NT/2000/XP, please consult the manufacturer’s
documentation.

Step 1.

From the Win95/98/2000/XP Start Button, select Settings, then Control Panel. The

Win95/98/2000/XP Control Panel displays.

Step 2.

Double-click on the Network icon.

Step 3.

Check your list of Network Components in the Network window Configuration tab. If

TCP/IP has already been installed, go to Step 8. Otherwise, select Add to install it now.

Step 4.

In the new Network Component Type window, select Protocol. In the new Select

Network Protocol window, select Microsoft in the Manufacturers area.

Step 5.

In the Network Protocols area of the same window, select TCP/IP, then click OK.

You may need your Win95/98 CD to complete the installation. After TCP/IP installation is

complete, go back to the Network window described in Step 4.

Step 6.

Select TCP/IP in the list of Network Components.

Step 7.

Click

Properties

, and check the settings in each of the TCP/IP Properties window:

Bindings Tab:

both

Client for Microsoft Networks

and

File and printer sharing for

Microsoft Networks

should be selected.

Gateway Tab

: All fields should be blank.

DNS

Configuration Tab: Disable DNS

should be selected.

IP Address Tab: Obtain IP

address automatically

should be selected.

Step 8.

With the WH-5420CPE powered on, reboot the PC/wireless client. After the

PC/wireless client is re-booted, you should be ready to configure the WH-5420CPE. See

Chapter 2.

«
...
15
16
17
18
19
...
»

Содержание WH-5420CPE


































































































Отзывы:

Нет отзывов

Похожие инструкции для WH-5420CPE

Бренд: Cambium Networks Страницы: 196

Бренд: Cambium Networks Страницы: 478

Бренд: Cambium Страницы: 301

Бренд: Cambium Networks Страницы: 287

Бренд: CES Страницы: 30

Бренд: US Robotics Страницы: 108

NetVanta 150 Series

Бренд: ADTRAN Страницы: 28

RangeMax NEXT WNR834A

Бренд: NETGEAR Страницы: 106

Бренд: Netis Страницы: 16

Бренд: Sercomm Страницы: 14

Бренд: Exibel Страницы: 2

Бренд: Motorola Страницы: 54

Бренд: Motorola Страницы: 708

Бренд: Motorola Страницы: 68

Бренд: Motorola Страницы: 66

Бренд: Motorola Страницы: 48

media access tg233

Бренд: Technicolor Страницы: 6

Бренд: u-blox Страницы: 47

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды