3. Configuring the
SIP VoIP ATA Adapter
AirLive VoIP-111A/VoIP-120A User’s Manual
17
This figure is for VOIP-111A
Field
Description
Forward Type of
phone1
Default is Disable. To configure Phone 1 forward type.
Here provides 5 options: Disable Always, Busy, No Answer, Busy
or No Answer.
*Note:
Please make sure your service provider support this
forward function.
Forward Number
of phone1
To configure Phone 1 forward number, simply dial [number or digit
string]. The maximum digit length is 63.
Rings of phone 1
That feature is used for no answer forward only. Default is 3 rings.
When there is no answer after configured rings, ATA forward to
pre-configured number automatically. The configuration ring range
is 2 to 8 rings. This mode only supports Forward Type: No Answer.
Hotline Type of
phone 1
Phone 1 hotline function, default is Disable. If Enable, ATA will dial
the hotline number immediately when you pick up phone.
*Note:
You need to configure Hotline number in advance. See the
next row.
Hotline Number
of phone 1
Configure Phone 1 hotline number. You can enter IP address or
number or digit string and the maximum length is 63 digits. For
instance, IP address: 192.168.1.23 or telephone number:
0800024365.
Delay of phone 1
When you pick up the phone before dialing, ATA start to count time
until the first digit was dialed. Default time is 3 seconds. ATA will
use Hotline number to dial if configured time was expired. The
configuration range is 1 to 6 seconds.
