manualshive.com logo in svg

AirLive SD-2020, Руководство пользователя, Страница: 108 / 111

Поделиться
Скачать
AirLive SD-2020 Скачать руководство пользователя страница 108

9. Appendix: 

 
 
 
 

 

AirLive SD-2020 User’s Manual

 102

B.1.3 Home Setting 

This function allows users to set the main monitoring area as the home position for the 
camera. In addition, maximum time can also be set for defining the time for the camera to 
keep watching a stopped tracking object. The camera will return to the home position 
according to the defined time setting. 
 

z

 

Off / On 

The default setting of Home Setting is <Off>. Select <On> to enable the function. 

 

z

 

Home Position 

To set the home position, please click and drag the PTZ pointer in the view window to 
the desired position. Click on <Set> to confirm the position. 

 

z

 

Time 

Please type in the time that the camera should keep watching a stopped tracking 
object. The camera will return to the home position after the defined time period. 

 

z

 

Go  

Click on <Go> to move the camera to the home position. 

 

Save

：

Click on <Save> to confirm the settings. 

 

Содержание SD-2020
















































































































Отзывы:

Нет отзывов