AirLive IP-1000R Скачать руководство пользователя страница 18 | Manualshive

Страница: 18 / 63

AirLive IP-1000R Скачать руководство пользователя страница 18

4.4.1.5 PPTP

1. My IP Address and My Subnet Mask: the private IP address and subnet mask your ISP assigned

to you.

2.

Server IP Address: the IP address of the PPTP server.

3. PPTP Account and Password: the account and password your ISP assigned to you. If you don't

want to change the password, keep it empty.

3. Connection ID: optional. Input the connection ID if your ISP requires it.

4. Maximum Idle Time: the time of no activity to disconnect your PPTP session. Set it to zero or

enable Auto-reconnect to disable this feature. If Auto-reconnect is enabled, this product will

connect to ISP automatically, after system is restarted or connection is dropped.

5.

Connection Control: There are 3 modes to select:

Connect-on-demand: The device will link up with ISP when the clients send outgoing packets.

Auto-Reconnect(Always-on):The device will link upw with ISP until the connection is established.

Manually: The device will not make the link until someone clicks the connect-button in the

Status-page.

18

«
...
16
17
18
19
20
...
»

Содержание IP-1000R
































































Отзывы:

Нет отзывов