AirLinkWiFi UltraSky CPE2, Руководство пользователя

Страница: 12 / 62

12 / 62
SHAREDWEP : another handshake method of WEP encryption which also
encrypts through the WEP key and its encryption type is the same as that of the
Open Mode.
WEPAUTO : it can automatically select Open Mode or Shared Mode and its
encryption type is the same as the first two.
WPA : WPA that is authenticated by RADIUS server.
WPA-PSK : (WPA Personal) Wi-Fi Protected Access with the pre-shared key
(WPA is a solution to improve the safety of interoperable WLAN based on the
standard, which could greatly enhance data protection and access control level
of the wireless LAN system.).
WPA2 : WPA2 that is authenticated by RADIUS server.
WPA2-PSK : (WPA2 Personal) WPA2 with the pre-shared key, which can
provide better safety than WEP or WPA.
WPAPSKWPA2PSK : WPAPSKWPA2PSK is WPA-PSK and WPA2-PSK mixed
mode.
WPA1WPA2 : WPA1WPA2 is WPA1 and WPA2 mixed mode.
802.1X : This security mode is used when a RADIUS server is connected to the
Router. 802.1x, a kind of Port-based authentication protocol, is an
authentication type and strategy for users. The port can be either a physic port
or logic port (such as VLAN). For wireless LAN users, a port is just a channel. The
final purpose of 802.11x authentication is to check if the port can be used. If the
port is authenticated successfully, you can open this port which allows all the
messages to pass. If the port isn’t authenticated successfully, you can keep this
port “disable” which just allows 802.1x authentication protocol message to
pass.
When using OPENWEP, SHAREDWEP, WEPAUTO authentication, it is
required to set the key
: this router can be filled in 4 at most (ASCII or 16
hexadecimal with a length of 10-26) keys. Users can select one key as the
current valid key (default key) from four groups of the pre-set keys.
When using WPA-PSK, WPA2-PSK or WPAPSKWPA2PSK authentication,
it is required to fill the information as follows
:
WPA Algorithms : users can select AES (Advanced Encryption Standard) mode,
TKIP (Time Key Integrity Protocol) mode or a mixed-mode of the first two.
Pass Phrase : the password used by WPA (8-63 characters in ASCII code)
Key Renewal Interval : to generate a valid date for the key that you set.
When using WPA, WPA2 or WPA1WPA2 authentication, it is required to
fill the information in RADIUS server as follows
:
IP (IP address of RADIUS), port (monitoring port of RADIUS) and the shared key
(the authentication key of RADIUS server).
Policy : ' Allow ' means only allowing client ports with specific MAC address to be
connected while ' Reject ' means only banning client ports with specific MAC
address to be connected. ' Disable ' means all client ports can be connected.
Add a station Mac : Add the MAC address you want to control.
If you have changed the above settings, click “ Apply” button Apply Settings.