background image

September 2006

2

Redwing CDMA for Alltel - Quick Start, version 2.40

After the Setup Wizard connects it should show the details for your modem. If the incorrect modem 
is displayed, press the Reset Button on your modem. Click Next. 

The Setup Wizard needs to establish a connection to your modem.  When it connects, The Setup 
Wizard will automatically detect the model of your modem to offer specific tasks. 

Select 

Connected to a Serial Port

, check 

Auto Detect Port Settings

 or select the port from the 

drop down menu. Click Next.

3.

Selecting Tasks 

After the model of your Redwing is detected, you will be 
offered Setup tasks.  Choose the tasks you need.  Some 
tasks shown here might not be available for your Redwing 
model.

Click Next when you have selected your desired options.   

Activate Modem: 

Configure your Redwing to connect on the Alltel network. 

Setup Private Networking: 

Choose what type of network you will be using. 

This option is not required for most activations.

Test Modem Setup: 

Verify your Redwing is properly configured and connecting on Alltel’s net-

work. 

Setup a DUN Connection: 

Create a Dial-Up Networking entry for local connection.  This part of 

the setup is only needed if you will be using your Redwing to connect directly from a computer to 
the Internet or other network. 

 

 

Содержание Redwing CDMA










Отзывы: