12
5. Connecting to the Router Wirelessly
Below are the default wireless settings of the router. You must configure your wireless
network card to the same settings in order to establish a wireless connection to the
router. Please refer to your wireless network card’s manual on how to configure these
settings.
SSID:
default
Operating Mode:
Infrastructure
Authentication:
Open System
Channel #:
6
WEP:
disabled
If you want to change the router’s wireless settings, log in to the router and select the
Wireless
tab. Make sure that you click
Apply
and
OK
to save the settings.
For more information about wireless settings, refer to section
6.2
.
Содержание AR680W
Страница 1: ...300N Draft 802 11n Wireless Router Model AR680W User s Manual Ver 1A...
Страница 22: ...22 Write down the PIN if you are using Pin Code method and click next...
Страница 23: ...23 If you choose Push Button method make sure that you click on the Wi Fi Protected Setup button...
Страница 26: ...26 Click Continue on the router configuration screen...
