50
5.6.6 Miscellaneous
Wake-on-LAN is a technology that enables you to power up a network device remotely.
In order to use this feature, the target device must be Wake-on-LAN enabled and you
have to know the MAC address of the device, i.e. 00-11-22-33-44-55.
Clicking the
Wake up
button will make the router send a wake-up frame to the target
device immediately.
6. Troubleshooting
For 3G Users Only
Verify with your internet service provider to make sure that you are in a geographic area
that allows you to receive a 3G signal.
Also test your 3G card in a computer to make sure that the 3G card works properly and
is receiving a useable signal.
Make sure that the card is properly inserted in the router and that all lights on the 3G
card that should be lit are lit.
For Cable Modem Users Only
Step 1
Go to the router’s Setup Wizard.
Step 2
At the Cable Modem setting (
Dynamic IP Address
), click on the
Clone MAC
button and click
Next
.
Содержание AR360W3G
Страница 1: ...802 11g Wireless 3G Mobile Router Model AR360W3G User s Manual Ver 1A...
Страница 9: ...9...
Страница 17: ...17 Step 9 Click Apply Settings to save your settings and complete the configuration...
Страница 49: ...49 5 6 5 Reboot Click Reboot to reboot the router Click OK to reboot the router...