Airlink101 APO1000, Руководство пользователя

Страница: 32 / 168

27
AC_VO Voice
0x30
0xe0
0x88
0xb8
6, 7 High
Time-sensitive data like VoIP and streaming media are
automatically sent to this queue
„
IAPP Support : By default, it’s “ Disable ” .
Inter Access-Point Protocol is designed to enforce unique association throughout an ESS(Extended Service Set) and to
enforce secure exchange of station's security context between current access point (AP) and new AP during hand off
period.
IAPP supported only for WPA-PSK/WPA2-PSK, WPA-Enterprise/WPA2-Enterprise and 802.1X security type.
„
Maximum Clients : The default value is 32. You can enter the number of wireless clients that can associate to a
particular SSID. When the number of client is set to 5, only 5 clients at most are allowed to connect to this VAP.
„
VLAN ID(Tag) : By default, it’s selected “ Disable ”.
This system supports tagged Virtual LAN(VLAN). A valid number of 0 to 4094 can be entered after it’s enabled. If your
network utilize VLANs you could tie a VLAN ID to a specific SSID, and packets from/to wireless clients belonging to that
SSID will be tagged with that VLAN ID. This enables security of wireless applications by applying VLAN ID.
„
Security Type : Select the desired security type from the drop-down list; the options are Disable , WEP , WPA-PSK ,
WPA2-PSK , WPA-Enterprise , WPA2-Enterprise and WEP 802.1X .
Î
Disable : Data are unencrypted during transmission when this option is selected.
Î
WEP : Wired Equivalent Privacy(WEP) is a data encryption mechanism based on a 64-bit, 128-bit or 152-bit shared
key.
9
Key Length : The available options are 64 bits , 128 bits or 152 bits .
9
WEP auth Method : Enable the desired option among Open system and Shared .
9
Key Index : key index is used to designate the WEP key during data transmission. 4 different WEP keys can be
entered at the same time, but only one is chosen.
9
WEP Key # : Enter HEX or ASCII format WEP key value; the system supports up to 4 sets of WEP keys.