Step 6
Re-attach the back panel to the device and secure it with the two screws
removed in step 1.
Step 7
Connect Home NAS to your hub, switch, or router with the provided Ethernet
cable, and connect the supplied power adapter. Plug the power cord into a power
outlet.
(Note: You can also connect this device to your computer directly via the provided
USB or Ethernet cable to use it as an external hard drive. However, the Home Nas
should not be connected with both Ethernet and USB cables at the same time.)
Continue on Back
Step 8
Turn it on by pressing the power switch on the front of the device. Verify the
Power light is lit.
Step 5
Insert the plastic plate back to the device.
Congratulations! The hard drive installation is complete.
For more informa-
tion about this product, please refer to the User's Manual in the provided
CD.
Step 4
Secure the drive to the plastic plate on the sides with the provided four
screws.