Redwing AT Command Summary
Redwing GPRS User Guide Version 1.08
AirLink Communications, Inc.
Page 13
September 29, 2003
4.2
Redwing AT Command Summary
Following is a summary of all the AT commands for the Redwing GPRS. For more
information on these commands, see
AT Command Reference Guide
for the RIM
OEM Radio Modem 1902G and 1802G.
Command
Description
A/
reissue the last command
+++AT
ESC from data mode to command mode
ATA
answer a call
ATD
mobile-initiated call to dialable number
ATD><mem><n>
initiate call to phone number in memory <mem>
ATD><n>
initiate call to phone number in current memory
ATD><str>
initiate call to phone number in memory with corresponding alphanumeric
field
ATDL
redial last telephone number used
ATE
set command echo mode
ATH
disconnect existing connection
ATI
display product identification information
ATL
set monitor speaker volume
ATM
set monitor speaker mode
ATO
switch from command mode to data mode
ATP select
pulse
dialing
ATQ
set result code presentation mode
ATS0
set number of rings before automatically answering the call
ATS1
count the number of incoming rings
ATS2
set the character used to escape from data mode
ATS3
set termination character for a command prompt
ATS4
set response formatting character
ATS5
set editing character for a command prompt
ATS7
set number of seconds to wait for connection to complete
ATS8
set number of seconds to wait when there is a comma dial modifier
ATS10
set disconnection delay after indicating the absence of data carrier
ATS12
set the escape code guard time
ATS13
set the disconnection delay after a call has been terminated
ATV
set result code format mode
ATX
set CONNECT result code format and call monitoring
