Removal
NOTE:
If unit has fitting (1), tube (17) and manifold (18).
1.
Disconnect power cord from outlet.
2.
Remove fitting (1) which connects terminal box (7)
to pump (2) and fitting (1).
3.
Remove screws (6) to remove heatsink (3). Discon-
nect board wire connectors and motor wire connec-
tors, then disconnect ground wire (30) from terminal
box (7).
4.
Remove wire strain reliefs (5, 31) and pull out the
wires from terminal box (7).
5.
Remove two screws (8) then remove terminal box
(7) from motor (103).
6.
If unit has fitting (19) instead of (1, 17, and 18),
remove fitting (19).
18
7
17
1
3
5
2
8
6
16
19
ti17430a
ti17428a
1
31
30
103
