2
Important instructions
Read and save these important safety
instructions before using this fan, when
using electrical appliances, basic safety
precautions should always be followed
including the following:
WARNING
- To reduce the risk of fire or
electrical shock, do not use this product
with any solid state speed control device.
To reduce the risk of fire or electric shock
and injury to persons, do not use in a
window.
-
Use this fan only as described in this
manual. Other uses not recommended
may cause fire or electric shock.
-
This product is intended for
HOUSEHOLD USE ONLY and not for
commercial, industrial or outside use. To
protect against electrical shock, do not
place fan in window, immerse unit, plug
or cord in water, or spray with liquids.
-
Unplug the fan from the outlet when not
in use, when moving fan from one
location to another and before cleaning.
-
Do not
operate the fan in the presence
of explosive and/or flammable fumes.
-
Do not
place the fan or any parts near
an open flame, cooking or other heating
appliance.
-
Avoid contact with moving fan parts.
-
To disconnect, grip the plug and pull it
from the wall outlet. Never yank the
cord.
-
The use of attachments is not
recommended and may cause hazards.
-
Always use on a dry, level surface.
-
Do not
operate if the fan housing is
removed or damaged.
-
Discard fan or return to an authorized
service facility for examination and/or
repair.
-
Do not
run cord under carpeting. Do
not cover cord with throw rugs, runners,
or similar coverings. Do not route cord
under furniture or appliances.
-
Arrange cord away from traffic area and
where it will not be tripped over.
Assembly
1.
Place the
base
on a flat
surface. Remove the
locking mechanism
from
the pole and insert the pole
onto the base.
2.
Turn over the base with the
pole inserted and secure by
turning the
locking
mechanism
clockwise until completed
fastened.
3.
Place the
motor assembly
and
control panel
onto the
extension pole
and secure by turning the
assembly
knob
clockwise.
4.
Remove the
rear grill mounting nut
by turning it counter-clockwise.
5.
Place the
rear grill
onto
the
motor housing
aligning the 3 raised
knobs on the top of the
motor housing
with the
3 holes on the grill.
6.
Place the rear
grill
mounting nut
and
tighten turning clockwise.
7.
Align the
blade
onto the
shaft
and secure it by
tightening the
blade
knob
counter-clockwise.
8.
Fix the front grill and the
rear grill with the circlip
and fasten the ring
around the grill. You will
hear a click sound
around the grill.
9.
Then use the fasten clip
to tighten the fan grill.
10.
Secure further with the
screw and tighten with a
screw driver.
How to operate
