■
chapter 4 upgrading your computer
4-6
Upgrading the System Memory
Many applications will generally run faster when the computer’s
dynamic memory capacity is increased. The computer provides two
DDR2 memory sockets. There is one located underneath the
System Device Cover and another one located underneath the
keyboard. You can increase the amount of memory by replacing the
existing one with a dual inline memory module (commonly known
as SO-DIMM) of a higher capacity. The SO-DIMM can be 256MB,
512MB, or 1024MB in capacity. The SO-DIMM is of type DDR2
SDRAM, has 200 pins and runs on 1.8V.
Warning:
Memory upgrade is a delicate process. Please observe the following
instructions carefully or have a qualified technician install it for you. Damages due to
mishandling of this procedure are NOT covered by the manufacture’s warranty.
Warning:
Changing memory while your computer is in suspend or power-saving
mode may cause permanent damage to the hardware. Make sure you turn off the
power and unplug the AC cord before proceeding with a memory upgrade.
Warning:
You should only use the DIMM module that is approved by the reseller
or the manufacturer; otherwise the system may become unstable.
