WHEEL LOCKS
26
AMG Medical Inc •
www.amgmedical.com
WARNING:
After ANY adjustments,
repair or service and
BEFORE use, make sure all
attaching hardware is
tightened securely - otherwise
injury or damage may result.
NOTE – Before adjusting or replacing the wheel-lock sub-
assemblies, ensure that the pneumatic tires are inflated to
the recommended 45 – 50 PSI (3.1 – 3.4 atm) on the
sidewall of the tire.
1. Ensure the wheel-lock is in the open (unlocked)
position.
2. Loosen the bolt and locknut that secure the wheel-lock
to the wheelchair frame.
3. Adjust the position of wheel-lock until the
measurement between the rear wheel and the wheel-
lock shoe is between 1/4 and 13/32 inches.
4. Securely tighten the bolt and locknut.
5. Engage the wheel-lock and push against the wheelchair
to determine if wheel-lock engages the wheel-lock shoe
enough to hold the wheelchair.
6. Repeat the above procedures until the wheel-lock holds
the wheelchair.
AIRGO™ OWNER’S MANUAL
1/4” - 13/32”
(6.4 - 10.3 mm)
