Airgle Purepal AG950, Руководство пользователя

Страница: 16 / 23

16
The art of purifi cation
®
17
The art of purifi cation
®
When your unit is set on High, the sensor (on the side of the unit) is more sensitive to the environment.
The system will auto-activate when it detects small amounts of particles in the air. And since it is
more responsive to these small amounts of particles, it will activate frequently and this will shorten
When you unit is set on Low, The sensor (on the side of the unit) is less sensitive to the environment.
The system does not auto-activate until it senses a medium to high amount of particles in the air. This
What happens in High Mode?
What happens in Low Mode?
USING THE REMOTE CONTROL
Use the remote control to:
1.
2. Change mode from manual to auto
3. Regulate fan speed
4. Set Timer
The infrared receiver of the Airgle ® system is located in the right hand bottom corner of the control
panel. In order to get the best signal transmission, the remote control should be pointed at the
control panel when pressing any button on the remote.
1. Open the battery compartment by pressing the small lever to the side and slide the battery
compartment out.
2. Remove the used battery.
3. Insert the new battery (Lithium coin battery 3V). Be sure that the (+) and (-) are correct.
Note: Rechargeable batteries are not compatible with the remote control.
Replacing the remote control battery
1
2
3
4
Used battery