Airgle AG600, Руководство пользователя

Страница: 8 / 28

5 . Speed: This indicates the speed selected by using the knob on the right-hand side of the
panel.
6. Auto: This indicates you have elected to use the Auto-Mode (it is on the right side of the
panel).
7. Timer: This indicates how much � me is le � un �l t he system shuts down (ac � vated by the
Timer bu � on on the right-hand side of the panel).
ADVANCED FUNCTIONS
T
ITANIUM
P
RO
® M
ODULE
Your unit has been pre-installed with the Titanium Pro® module and the light bulb icon will
display on your control panel. The light bulb indicates whether your unit has the module
installed, and also indicates when it is � me to replace the module by blinking. When that � me is
up, the light bulb icon will start blinking. A � er you replace the fi lter and press the Reset bu � on
(on the right-hand side of the panel), it will stop blinking. If desired, the Titanium Pro® module
can be turned o ff.
1. With the power turned on, press the Mode bu � on, hold down for more than fi ve seconds
and the light bulb indicator on the LCD display will start blinking.
2. When the light bulb is on, release the Mode bu � on to turn on the Titanium Pro® module.
3. When the light bulb is o ff, release the Mode bu � on to turn o ff the Titanium Pro® module.
C
ONTROL
S
ETTING
The default se � ng for the unit is “Moderate” and will be displayed as four bars on the control
panel. This se � ng should meet air puri fic a � on needs in most environments.
1. When you use Models AG600/AG900, make sure the units are powered on (plug in the units
and con fi rm the knob is at the “Speed 1 to 5 ” posi � on).
2. Press and hold the Timer bu � on for more than fi ve seconds and you will hear a “ding” sound.
The Control Se � ng bars will cycle through High, Moderate, Low, Moderate......and then start
blinking.
3. If you release the Timer bu � on when “High” is blinking, the system is set to High Mode.
Answer the following questions to assess whether you need to change your control setting:
Yes No
Are you no �ci ng severe indoor air pollu � on problems?
Are you or a member of your family having severe asthma and/or allergy issues?
Do you want to be able to always set your system to Auto mode?
Auto Mode: Your system will start on high to purify the air un �l i t senses an extremely low
concentra � on of par�c les, and then will automa � cally change itself to the low se � ng.
Yes No
If you answered “Yes” to any of the que s� ons above, you may want to consider
changing your se � ng to “High”.
If you answered “No” consider the following ques � on:
Do you have a relatively clean environment and purchased the unit for general air
purification reasons?
If you answered “Yes” to this ques � on, you may want to consider changing your se � ng to “Low”.
Page | 8 of 28