Airfree FIT 700, Инструкция по эксплуатации

Страница: 7 / 12

7
Plug power cord into the nearest outlet.
Make sure the wall surface is dry. Never use the Airfree
®
Fit as a stand alone nor in wet
conditions.
Airfree ® Fit is to be installed on walls, never on the floor and do not install under furniture,
shelves, or behind curtains, as it will reduce airflow and Airfree ® efficiency in reducing
microorganisms.
Place each Airfree ® in rooms up to 140 ft² for FIT 700 and rooms up to 180 ft² for FIT 800. For
larger rooms use proportionally additional Airfree ® units. The use of just one Airfree ® in rooms
larger than recommended will reduce Airfree ® efficiency.
Airfree ® must be continuously on in the same room, 24 hours a day.
Airfree ® can be installed in rooms equipped with air conditioning and heating systems.
However it is recommended not to place Airfree ® nearby them to avoid potential interference
in Airfree ® air flow.
Airfree ® can be placed in corridors but its air sterilization effects will not affect adjacent rooms.
Airfree ® shall not be placed near doors or under windows to avoid sterilized air to exit the
room.
Installing and Connecting
Drill 2 vertical holes spaced apart as per the attached diagram.
After drilling the 2 holes, install the enclosed 2 screws leaving 5mm free distance from the wall.
Hang Airfree ® from the two screws. Make sure Airfree ® can not be removed after installation
by exercising upward pressure. If loose, please remove Airfree ® and gradually tighten the
screws until Airfree ® is really secured to the wall.
Airfree ® is to be used in rooms with minimum air volume of 330 ft³ (10 m³), free of obstacles.