Airflow LA HABRA, Руководство пользователя

Страница: 6 / 10

5
ELECTRICAL CONNECTIONS
Step 7a. Attach the fan wires to the ceiling fixture
outlet box wiring by twisting the bare ends of the
wires together and then securing with a wire nut. Test
that the connection is secure by pulling on the wire
nut. Connect in this order:
2 WHITE WIRES
BLUE
D1-OPTION
WIRE
WIRE NUT
2
GREEN
WIRES
Step 7b.
• GREEN leads from mounting plate and fan to GROUND
conductor of power source. Secure with wire nut.
• WHITE wire from fan to white NEUTRAL wire in ceiling
fixture outlet box. Secure with wire nut.
• BLUE wire and BLACK power wire from fan to BLACK
power wire in ceiling outlet box. Secure with wire nut.
2
BLACK
WIRES
CANOPY HATCH INSTALLATION
Step 8. Tuck the wires into the outlet box with the
wire nuts pointed upwards, so that the WHITE and
BLACK wires are on opposite sides of the outlet box
and all wires are clear of the bracket opening.
Step 9. Loosen the 2 canopy screws in the mounting
bracket. Raise the canopy to the mounting bracked,
assuring that no wires are pinched, and pass the canopy
screws through the keyholes in the canopy.
Step 10. Rotate the canopy counter clockwise to
engage the keyholes. Tighten the canopy screws firmly
by hand only.
CANOPY
CANOPY
SCREW
Step 11. On the motor remove the four
shipping blocks by unscrewing the screws.
Set these screws aside for installing the
blades in Step 12.
Discard the five shipping blocks.
REMOVE SHIPPING BLOCKS
SHIPPING
BLOCKS
Note: Save these five screws, they
will be used in Step 12!
RUBBER
CANOPY
GASKET