Airflow AirHub 100, Системное руководство, Страница: 102 / 144

AirFlow AirSwitch 1200 • System Manual • Appendix A: CLI Reference
• 102 •
DCN
: a
s1
200
sm-
B11
show
Displays the current value of various settings for this switch; these Show Parameters
are listed in
Table A-1 . This command is available from all three levels.
You can use multiple parameters with one SHOW command, and the CLI will display
all requested values. Use the special SHOW ALL command to display the entire run-
ning configuration.
sysname
Assigns a system name to this AirSwitch, which will display in the CLI prompt at all
levels.
Syntax: SYSNAME <name>, where:
<name> = Name assigned to the server, as an alphanumeric string up to 16 charac-
ters. Default value is AirSwitch.
tar tvf
Displays the list of files contained in a specified tar file, without actually untarring
it.
Syntax: TAR TVF <filename>, where:
<filename> = Tar file whose contents you want to view.
tar xf
Unpacks all files contained in a specified tar file. This command is used to install an
upgrade of system software.
Syntax: TAR XF <filename>, where:
<filename> = Tar file whose contents you want to view.
type
Displays the content of a specified text file. This is useful for reviewing backed up
config files, to check contents.
Syntax: TYPE [filename], where:
[filename] = Name of the file whose content you want to display.
user add
Creates a new administrative user.
Syntax: USER ADD [{telnet | oper-type}] <USERNAME> , where:
{telnet | public} = user type; oper-type have read-only access to current public
port user group configurations and visiting user statistics (see"Viewing Current
Visitor Groups," on
page 60 ); telnet type have general telnet access (see
"Managing Telnet Users," on page 41 ). Default type is telnet.
<username> = The new user you want to create. You can use up to 32 letters,
numbers, symbols and spaces; do not use control characters. When you press
Return, you will be prompted for a password for this user, and then prompted
to retype the new password.