1.
2.
3.
Carefully remove all contents from packaging
and inspect product to make sure there is
no damage.
Assemble the appliance as per the instructions.
Charge for 4 hours.
4. Your appliance is now ready to use.
CHARGING
Before first use, charge for 4 hours.
The window cleaner needs to be charged for 4
hours for 30 minutes of continuous use.
To charge:
1. Connect the lead from the charging adaptor to
the charging port on the window cleaner.
2. Plug the adaptor into a mains power supply.
The indicator light will illuminate red to show
the battery is charging. When the window
cleaner is fully charged the indicator light will
illuminate green.
3. Switch off at the mains and remove the
charger from the window cleaner.
Note: If the indicator light is flashing, the window
cleaner is not charging. Press the power button to
reset the window cleaner.
ASSEMBLY
1. Align the squeegee vacuum head and the main
body and click into place.
2. To attach the microfibre cloth, attach the
Velcro that is on the squeegee vacuum head.
USING YOUR APPLIANCE
1. Wipe the leading edge of the squeegee to
avoid any streaks.
2. Using the water beaker, fill the water tank by
removing the water tank cover. Take care
not to over
fill.
You can add a small amount of
window cleaning solution.
3.
4.
Use the trigger to spray the window and
then wipe any excess dirt away with the
microfibre cloth.
Turn the window cleaner on by pressing
the power button.
5. Using a vertical motion, use the window
cleaner from the top to the bottom of the
window, until the window is clear.
6. Hold the window cleaner at the bottom of
the window to suck up any excess dirty water.
7. Turn the window cleaner off when the dirty
water inside
fills
the tank.
8. Open the recycled water tank cover and pour
away the dirty water.
Note: Always unplug the window cleaner from the
charger before assembly, cleaning, maintenance or
use.
OPERATION
USING THE WINDOW CLEANER
FOR THE FIRST TIME
